Time-A-Valve



Valves

A high quality, Solid State Electronic Timer available integral with any Allenair Solenoid Valve. Eliminates the need for complicated wiring to a control panel. Air circuitry, maintenance and trouble shooting are simplified. Pre-assembled Time-A-Valves ® are simpler to install than separate timing devices and they are less costly.

FEATURES:

• Sturdy housing and permanent connection make it immune to machine vibrations.
• Long life Light Emitting Diode (LED) gives visual indication of solenoid energization.
• Electrical Override is standard on all timers. Allows direct energization of solenoid coil, bypassing the timer.
• Only one electrical connection operates both timer and solenoid.
• Simple, screw-type time adjustments. Lock nut prevents time setting from changing.
• Time delay and speed control adjustments (on 4-Way Valves) made at the same time and place at the valve.
• Compact, space-saving assembly.
• Timer and solenoid replacements can be made without disturbing the valve body or piping.
• Auxiliary output is standard. This allows actuation of an external relay or control device and the Time-A-Valve ®, simultaneously. A load of no more than 1 AMP can be connected to the Auxiliary Output.

Models 1-7 “SINGLE TIMER

Time-A-Valve ® shown with an Allenair 3-Way Solenoid Valve. We will ship a Time-A-Valve with any Allenair Solenoid Valve, Cyl-Check ®, Index Table, Valve-in-Head Cylinder or other Allenair Solenoid Operated Fluid Power Products.

Models 8-10 “DUAL TIMER”