Quick Exhaust Valves



Valves

1/8 NPT. COMBINATION QUICK EXHAUST AND SPEED CONTROL VALVES WITH FULL FLOW EXHAUST AVAILABLE IN THREE DIFFERENT BODY STYLES. FOR USE WITH UP TO 1-1/2” DIAMETER BORE CYLINDERS

5 PSI. Minimum
250°F. Maximum Temperature.
150 PSI. Maximum (Air Only).

MALE TO FEMALE	FEMALE TO MALE	MALE TO PLASTIC TUBING	FEMALE TO FEMALE

MODEL QE100MF	MODEL QE100FM	MODEL QE100P	MODEL QE100FF

All Bodies are 1/2” Wide
*1/4-28 Threaded Exhaust Port

QUICK EXHAUST VALVES are used with Air Cylinders, Brakes, Clutches, etc. to speed their reaction or travel time by exhausting the air directly to atmosphere rather than back through a restrictive control valve.

APPLICATION IDEAS

AS A QUICK EXHAUST VALVE:

Install Quick Exhaust Valves in the ports of a double acting or single acting Air Cylinder to obtain maximum speed.

AS A FLOW CONTROL VALVE:

When using a control valve with no built-in flow control valves, install Quick Exhaust Valves, with adjustable exhaust accessory, in cylinder ports to obtain speed control.

Use on valves with a common adjustable exhaust by installing a Quick Exhaust Valve, with adjustable exhaust accessory, in one cylinder port for speed control in one direction. Other .direction is controlled by the common adjustable exhaust at the valve.

AS A SHUTTLE VALVE:

By connecting two separate lines to the inlet and exhaust ports respectively and the output port to a single point, you can have two different pressures going to a single destination.