Allenair - Small Bore Cylinders
SMALL BORE CYLINDERS
DESIGN FEATURES
These Cylinders are not throw-a-way
type. Seals can easily be replaced when required after a long
trouble-free life. They have corrosion resistant brass
tubing, precision honed (16 Micro or better) with cross hatch
lubricant retaining pattern. Front and Rear Aluminum Heads are
precision machined and
threaded into the tube.
Pressure Rating: 150 PSI. Pneumatic or Hydraulic. Breakaway:
Approximately 5-10 PSI.
SMALL BORE CYLINDERS BASIC
CONSTRUCTION
1/2" & 3/4" BORES: Feature low friction U-Cups on the Duronze
Piston, coupled with a 416 Stainless Rod. Small Bore Cylinders are available as
standard in half-
inch increments to 6" stroke. 1-1/8" BORE: Features an
all-O-Ring construction. Aluminum Piston, ground and polished 416 stainless
steel rod. Cylinders
are available as standard in half-inch increments to
6" and inch increments to 12" stroke. Special strokes available in all bore
sizes. Up to 14" maximum on
1-1/8" bore and 10" maximum on 1/2" & 3/4"
bores.
TYPE SM SINGLE ENDED SMALL BORE
CYLINDERS
An all purpose light duty pneumatic Cylinder designed for nose mounting
with rear face porting. 1-1/8" Bore is also
available in 300
Series Stainless Steel, TYPE SSSM. See catalog SS200.
TYPE SMD DOUBLE ENDED SMALL BORE
CYLINDERS
Similar to above except there is a single rod which protrudes from both
ends, and as one end retracts the other
extends. 1-1/8" Bore is
also available in 300 Series Stainless Steel, TYPE SSSMD. See catalog
SS200.
TYPE SMT SINGLE ENDED SMALL BORE
CYLINDERS
Cylinder is designed for Clevis and various other universal mountings.
TYPE SP SINGLE ENDED SMALL BORE
CYLINDERS
Similar to Type "SM" except a square front head is used, thereby
eliminating the need for a separate Foot Mount.
TYPE SPD DOUBLE ENDED SMALL BORE
CYLINDERS
Similar to Type "SMD" except a square front heads have been
incorporated, eliminating the need for separate Foot
Mounts.